产品中心/ products

您的位置:首页  -  产品中心  -    -  阿美特克  -  Ametek ASC-400

Ametek ASC-400

  • 产品型号:
  • 更新时间:2024-06-24

简要描述:Advanced Signal Calibrator ASC-400
The ASC-400 is more than just a
signal calibrator. Combined with
our APM external pressure modules
or our dry-block calibrator,
Ametek ASC-400

产品详情

Advanced Signal Calibrator  ASC-400

Ametek ASC-400

Ametek ASC-400

User friendly and innovative 

Advanced Simplicity

Optimal read out visibility and high accuracy
Large full color display and extremely user friendly interface. The ASC-400 accuracy is designed to meet high demands
from modern sensores and transmitters

Input and output
RTD: 16 different types, TC: 13 different types, Current 0-24 mA DC, Voltage 0-20 VDC, Frequency 0.05 to 10,000 Hz,
Pulse train out-put, Resistance 5 to 4000 ohm 

Simultaneoues read-back and fast RTD simulation
Including isolated read-back from device-under-test of mA, V, and pressure. The RTD simulation feature is fast enough


Calibrate pressure and temperature
Full featured pressure calibrator, just apply an APM, and benefit from, automatic leak-test, pressure-switch calibration
and more… Use the ASC-400 together with JOFRA temperature calibrators, add measurement channels for sensors
or temperature switches

 

Measure temperature
ASC-400 can be used as high accuracy thermometer, ASC-400 works with RTD´s and CvD equations, to obtain true
temperature, based on “true ohm” technology!


ASC-400 is a portable process 

signal calibrator that provides the

functionality and accuracy

you expect from a laboratory
calibration system, but compact
enough to fit into the tool box
and be operated with one hand
for easy field calibration.
The ASC-400 is more than just a
signal calibrator. Combined with
our APM external pressure modules
or our dry-block calibrator,
it will calibrate pressure and
temperature, and used together
with JOFRACAL even document
it as well.
The full numerical keypad with
a series of function keys and the
cursor keys, provide a simple
and quick user interface. The
new full color display offers the
best visibility and overview.
The high accuracy of ASC-400
has not been achieved on
account of fragile measurements
or source circuitries, the
ASC-400 has fuse less protection
– no lost replacement fuses...

Unique “non-menu” user interface
Easy to use, single layer user interface, no deep menu structure!
Operate and set up ASC-400 to perform your tasks, fast and intuitive

Simultaneous input and output

ASC-400 offers simutaneous input and output, which makes it possible
to calibrate and adjust a transmitter with no need for additional equipment.

Temperature reading at reference level
The ASC-400 offers the possibility to charaterize a RTD sensor. This feature
is used to add a missing special curve or to characterize a
reference RTD. This together with “true ohm” technology, eliminating
thermo voltage in the RTD loop, makes ASC-400 a true reference thermometer.
If you choose a reference RTD from the accurate and stable JOFRA STS
temperature sensors, they are delivered with a traceable calibration
certificate including the neccessary Callendar-Van Dusen coefficients.
Enter the figures into the unit and you have a temperature reference.
Complement this with a dry-block temperature calibrator and your
ASC-400 becomes the heart of your portable calibration lab.

Fuseless protection
Useful large soft case (Option C)
If you by mistake connect the ASC-400 to over voltage, the unit is protected
with a fuseless protection feature. This feature protects the unit
and prevents expensive repairs and recalibration of the unit.
To avoid injury never connect the unit to the mains supply!
As an option you can get the ASC-400 delivered with a large padded
soft case. The spacey soft case is designed for protection during transport.
The soft case has separate compartments for the unit, test leads,
test hoses, temperature probe, and APM pressure modules. A shoulder
strap ensures convenient and safe transportation when climbing ladders,
etc.
As standard the ASC-400 is delivered with 6 AA alkaline batteries.
Additionally two power supply options are available;
Option A, mains adapter, used as battery eliminator to preserve batteries
in long term workshop testing & calibration.
Option B, like Option A, but supplemented with 6 x AA Ni-MH chargeable
batteries, which are charged while mounted in the ASC-400.
 

Gauge or Absolute pressure? (Option BARO)
APM Pressure Modules (Accessory)
The choice is yours!
The BARO option turns any gauge
measuring APM into an absolute
measuring device.
Accuracy: ± 0.5 mbarA / 0.00725 psiA
Range: 700 to 1100 mbarA / 10.153 to 15.954 psiA
Includes all effects of linearity, hysteresis, temperature (-10 to 50°C /
14 to 122°F) and stability for one year.
Please note the BARO option is factory installed.
When used with APM CPF Series pressure modules the ASC-400 becomes
a true pressure calibrator with features such as; leak test, switch
test, scaling and online % error calculations.
Pressure range from vacuum to 1 000 bar / 15 000 psi, accuracies down to
0.025% RDG, fully temperature compensated, and stability for one year.
The modules are engineered for in-plant, field, or laboratory use. They
are ready-to-use with immediate recognition and use of the module
once plugged into the calibrator. All units are welded, with a permanent
filled diaphragm seal. Metal to metal cone seal, and O-ring. CPF
adapters to various threading available.
Up to 14 built-in engineering units
Automatic leak test, adjustable timer and automatic
calculation to leak rate / minute
Automatic pressure switch test, records automatically,
open, close and deadband values
Online % error calculation, fast and responsive
reading, for calibration and adjustment tasks

Specifications

JOFRACAL calibration software
JOFRACAL software ensures easy calibration of RTD´s, thermocouples,
transmitters, thermoswithes, pressure gauges and pressure switches.
JOFRACAL can be used with all calibration instruments. When used
with an ASM-800 signal multi scanner, it can perform a simultaneous
semi automatic calibration on up to 24 pressure and/or temperature
devices under test in any combination.
JOFRACAL software controls the complete calibration procedure, stores
the results and provides a calibration audit trail through hard-copy
certificates. All calibration data are stored for each sensor to monitor
drift and optimise recalibration intervals. A scheduler feature allows
planning of future calibrations.
• Temperature sensor, -40 to 155°C/-40 to 311°F
• Delivered with international traceable calibration certificate and CvD
coefficients, ready to enter into any ASC
• Sensor dimensions ø 4 x 200 mm + handle
• Calibration points, -40,-20,0,50,100,155°C/-40,-4,32,122,212,311°F
• Calibration accuracy ± 0.030°C/0.054°F
Temperature Sensor (Option T)

Ambient temperature specifications
Operating temperature.............................................-10 to 50°C / 14 to 122°F
Storage temperature................................................ -20 to 60°C / -4 to 140°F
All specifications specified
at ambient temperature ...............................................23°C ±5°C / 73°F ±9°F
Outside ambient 23°C ±5°C.................................................. ±0.003% rdg/°C
Outside ambient 73°F ±9°F...................................................±0.0017% rdg/°F
Power specifications
Batteries.................................................................................. 6 x AA batteries
1.5V AA.......................Alkaline (non rechargeable) or AA NiMh (rechargeable)
Mains adapter...................................(option) 9VDC/500mA - 230VAC/115VAC
Low battery warning....................................................................................Yes
RS232 communication interface
Connector ....................................................................... Mini USB female (B)
Communication rate................................................................USB 2.0 / ASCII
Physical specifications (LxHxW)
Unit.......................................................... 220x55x96 mm / 8.66x2.17x3.78 in
Weight incl. batteries............................................................... 584 g / 20.6 oz
Unit in soft case.................................... 235x95x115 mm / 9.25x3.74x4.53 in
Weight incl. test leads & test chips ...................................... 933 g / 32.91oz
Shipping size..................................... 275x100x175 mm / 10.83x3.94x6.89 in
Shipping weight ................................................................. 1233 g / 43.49 oz
Miscellaneous
CE - EMC...............................................................................EN61326-1:2012

Specifications

Specifications

Ordering
• ASC-400 unit
• Battery set (6 x AA)
• Electronic Manual (USB)
• 2 sets of test leads & test clips (black & red)
• Handy soft case, with pocket for the test leads and an opening in the top
to provide easy access to the test terminals
• Full international traceable calibration certificate
Standard delivery
Order No. Description
ASC-400 Multi-function Signal Calibrator
BARO Barometric module to absolute pressure mode (optional)
Certificate
F Traceable Certificate to International Standards
H Accredited Certificate - ISO17025 (optional)
Accessories (Optional)
A External Power Supply
B Power Supply /Charger plus 6 x Ni-MH rechargeable AA
C Large padded soft case with shoulder strap
T Temperature Sensor Pt100 incl. traceable certificate
ASC-400 BARO F C ASC-400 with barometric module, traceable certificate and soft case .

Accessories
121983 Extension Cable for Type K - 5 m
122523 Extension Cable for Type N - 5 m
120519 Thermocouple Male Plug - Type Cu-Cu - White
120518 Thermocouple Male Plug - Type R / S - Green
120517 Thermocouple Male Plug - Type K - Yellow
120516 Thermocouple Male Plug - Type J - Black
120515 Thermocouple Male Plug - Type T - Blue
120514 Thermocouple Male Plug - Type N - Orange
2206011 Thermocouple plug + K wire + alligator
2206012 Thermocouple plug + T wire + alligator
124720 External Power Supply / Charger 9VDC/200mA - 230VAC/115VAC
128859 6x 1.5V AA Ni-MH rechargeable batteries
65-PT100-LB-CABLE - Cable 2 m (6.6 ft.) with LEMO/Banana connectors
XXXX Various APM CPF Series - Advanced Pressure Modules
AMETEK Test & Calibration Instruments   
 
 

 

 

 

在线咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
公司简介  >  在线留言  >  联系我们  >  
产品中心
阿美特克

CONTACT

办公地址:上海市北京东路科技京城西楼30楼

TEL:15800509017 / 15921675992

EMAIL:2822212495@qq.com
扫码加微信
版权所有©2024 上海骋利电子科技有限公司 All Rights Reserved   备案号:沪ICP备2021016462号-3   sitemap.xml技术支持:化工仪器网   管理登陆

扫码加微信
Baidu
map